5 Pack - SMOK V8 Baby Q4 0.4 Ohm quad coil atomisers. 100% Organic Japanese cotton wicks for a purer taste. Ideally suits 30 to 65 watts. Patented design.

Due to the low resistance these SMOK V8 Baby Q4 Atomisers are only compatible with high-powered high-amp high-drain batteries, and you do need a powerful battery with these V8 atomisers - low wattage/ampage batteries are not powerful enough and would over-heat. DO NOT continue if your battery is getting too hot. Also, use zero or low nicotine e-liquids if you're into making vast amounts of vapour clouds. Medium or high nicotine liquids will burn harshly and not taste nice or may make you feel ill. For the biggest clouds you need a thicker e-liquid with a very high % of Vegetable Glycerine. Also start with the smallest airflow control hole and work up. Make sure the cotton wick is fully soaked before vaping.

5 pack - SMOK V8 Baby X4 quad coil atomisers 0.15 ohm. 100% Organic Japanese cotton wicks for a purer taste.

Fits the TFV8 Baby and TFV8 Big Baby tanks. Ideally suits 30 to 70 watts. Patented design.

Due to the low resistance these SMOK V8 Baby X4 Atomisers are only compatible with high-powered high-amp high-drain batteries, and you do need a powerful battery with these V8 atomisers - low wattage/ampage batteries are not powerful enough and would over-heat. DO NOT continue if your battery is getting too hot. Also, use zero or low nicotine e-liquids if you're into making vast amounts of vapour clouds. Medium or high nicotine liquids will burn harshly and not taste nice or may make you feel ill. For the biggest clouds you need a thicker e-liquid with a very high % of Vegetable Glycerine. Also start with the smallest airflow control hole and work up. Make sure the cotton wick is fully soaked before vaping.

5 pack - SMOK V8 Baby-M2 0.15ohm atomisers.

Compatible with Smok TFV8 0.15ohm Baby, Baby Beast tank and TFV8 Big Baby Beast Tanks

Packet of 5 SMOK Vape Pen 22 Atomisers, for the SMOK Vape Pen 22 e-cig.

0.3 ohms resistance.

5 pack - SMOK Vape Pen atomisers. 100% Organic Japanese cotton wicks for a purer taste.

Fits the SMOK Vape Pen and Vape Pen V2.

5 pack - SMOK Vape Pen X4 atomisers 0.4 ohm. 100% Organic Japanese cotton wicks for a purer taste.

Fits the SMOK Vape Pen e-cig.

Due to the low resistance these SMOK Vape Pen atomisers, they are only compatible with high-powered high-amp high-drain batteries, and you do need a powerful battery with these V8 atomisers - low wattage/ampage batteries are not powerful enough and would over-heat. DO NOT continue if your battery is getting too hot. Also, use zero or low nicotine e-liquids if you're into making vast amounts of vapour clouds. Medium or high nicotine liquids will burn harshly and not taste nice or may make you feel ill. For the biggest clouds you need a thicker e-liquid with a very high % of Vegetable Glycerine. Also start with the smallest airflow control hole and work up. Make sure the cotton wick is fully soaked before vaping.

5 pack - Vaporesso GTX Coils

Introducing the latest GTX coils with even more cloud and immense flavour production. The flax cotton and the non-woven fabric enable optimal flavour from your e-juice, released smoothly without tainting. The antibacterial cotton consistently delivers fresh and pure flavour that lasts longer than ever.

5 pack - VooPoo PnP atomisers and PnP VM atomisers

PnP and PnP VM Replacement atomiser coils for VooPoo tanks and pod devices.

NB: If you are sub-ohm vaping (less than 1 ohm coils) use medium (>50%) to high (70% to max) VG e-liquids, and do not use high nicotine e-liquids (no greater than 6mg nicotine).

Options:

• PnP-M2 0.6ohm mesh, recommended power range is 20 to 28watts. 
• PnP-R1 0.8ohm regular coils, recommended power range is 12 to 18watts, good for NicSalt e-liquids.
• PnP-R2 1ohm regular coils, recommended power range is 10 to 15watts, good for NicSalt e-liquids.
• PnP VM1 0.3ohm, recommended power range is 32 to 40watts SINGLE MESH
• PnP VM3 0.45ohm, recommended power range is 25 to 35watts SINGLE MESH
• PnP VM4 0.6ohm, recommended power range is 20 to 28watts SINGLE MESH
• PnP VM5 0.2ohm, recommended power range is 40 to 60watts MESH
• PnP VM6 0.15ohm, recommended power range is 60 to 80watts MESH

Please read the manual for your VooPoo device to check which coils are suitable, however here is a rough guide:

• PnP VM1 suits the DRAG X, DRAG S, VINCI range, NAVI, PnP 22
• PnP VM3 suits the DRAG X, DRAG S, VINCI range, NAVI, PnP 22 & 20
• PnP VM4 suits the DRAG X, DRAG S, VINCI range, NAVI, PnP 22 & 20
• PnP VM5 suits the DRAG X and DRAG S
• PnP VM6 suits the DRAG X
• PnP-R1 suits the DRAG X, DRAG S, DRAG Baby, FIND Trio, VINCI range, NAVI, PnP 22 & 20
• PnP-R2 suits the DRAG X, DRAG S, DRAG Baby, FIND Trio, VINCI range, NAVI, PnP 22 & 20
• PnP-M2 suits the DRAG X, DRAG S, DRAG Baby, FIND Trio, VINCI range, NAVI, PnP 22 & 20

5 pack - VooPoo UFORCE N series mesh Atomisers

Designed for VooPoo Uforce tanks.

UFORCE N1

A single mesh coil, great for clouds and flavour.
Resistance: 0.13Ω
Power: 50-100W
Best: 70-80W

UFORCE N2

Dual mesh coils
Resistance: 0.3Ω
Range: 45-80W
Best: 55-65W

UFORCE N3

Triple mesh coils. 
Resistance: 0.2Ω
Power: 65-100W
Best: 75-85W

5 pack - YC atomisers for the VooPoo FINIC 16 and 20 vape pens.

Options:

• YC-C 1.6ohm ceramic coil. Good for high nicotine e-liquids, high PG / low VG. Not DL, ideal for MTL
• YC-R1 0.6 ohm. Use high VG and low nicotine e-liquids if sub-ohm vaping using this 0.6 ohm coil.
• YC-R2 1.2ohm. Not DL, ideal for MTL and Good for NicSalt e-liquids.

YC-C is compatible with VOOPOO FINIC 16 and 20 AIO vape pens.

YC-R1 is compatible with VOOPOO FINIC 20 AIO vape pens.

YC-R2 is compatible with VOOPOO FINIC 16 and 20 AIO vape pens.

5 pack of Aspire Nautilus XS Mesh Atomisers

Intense smooth and flavourful experience.

0.7 ohm (recommended wattage range is 17–22W).

Fits the Aspire Nautilus XS tank system, Aspire Rover 2 vape kit, Nautilus X and Aspire PockeX.

5 pack of Innokin Prism T18E atomiser coils

1.7ohm ( 9 to 13.5 watts)

Compatible with Innokin Endura T22 Pro Vape Kit, T18E Pro Tank and Innokin Prism Endura T18E vape kit